过氧化氢氧化酸性品红催化光度法测定痕量铬(Ⅵ)

基于在弱酸介质中,铬(Ⅵ)催化过氧化氢氧化酸性品红的反应,建立了动力学分光光度法测定痕量铬(Ⅵ)的新方法。本法的检出限为5.7×10~(-9)g/ml,线性范围为0～160ng/ml。可用于电镀废水和电镀排放水中铬(Ⅵ)的测定。     

(NiV13O38)7-的电子结构和催化性质的探讨

使用SCC－DV－Xα方法研究了高钒杂多化合物（NiV13O38）7-的电子结构，并探讨了它的催化性质·结果表明，（NiV13O38）7-是一种比Keggin结构更强的催化剂。分析了该阴离子中的键的强弱关系，认为配位数越少的氧与V形成的键越强．并分析了前线轨道HOMO，LUMO的组成，从而得出它的催化活性中心是Ni，V、一配位端氧，二、三配位桥氧，五配位中心氧的结论。     

Applications of chalcogenide glass optical fibers

Chalcogenide-glass fibers based on sulfide, selenide, telluride and their rare-earth-doped compositions are being actively pursued worldwide. Great strides have been made in reducing optical losses using improved chemical purification techniques, but further improvements are needed in both purification and fiberization technology to attain the theoretical optical losses. Despite this, chalcogenide-glass fibers are enabling numerous applications that include laser power delivery, chemical sensing, and imaging, scanning near field microscopy/spectroscopy, IR sources/lasers, amplifiers and optical switches.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

废水中偏二甲肼在Ni/Fe催化剂上的催化分解研究

研究了Ni/Fe催化剂对废水中偏二甲肼臭氧化分解的催化作用,考察了组分含量、体系的pH值和偏二甲肼初始浓度对催化反应的影响.结果表明,Ni/Fe催化剂对水中偏二甲肼的臭氧化具有良好的催化活性.催化剂组分含量、体系的pH值和初始浓度对反应的影响程度不大.对催化剂的XRD表征结果表明,催化剂主要由尖晶石结构的铁酸盐和FeNi3合金相组成,催化剂的良好催化性能与催化剂中尖晶石结构的铁酸盐和FeNi3合金相的形成有关.     

稀土在熔盐被覆铬碳化物中的作用研究

研究了熔盐被覆铬碳化物的工艺过程，着重探讨了稀土对Ｔ１２Ａ钢熔盐渗铬的催渗及微合金化作用机理。结果表明，在加入稀土的熔盐中渗中提高渗速３０％－５６％，同时还能提高工件表面的抗氧化和耐腐蚀性能以及工件的使用寿命。     

The role of various binding materials for trace elemental analysis of powder samples using laser-induced breakdown spectroscopy

Study of various binding materials like potassium bromide, poly(vinyl alcohol), starch, silver and aluminum has been carried out using laser-induced breakdown spectroscopy (LIBS). The role of matrix effects using these five binders on LIBS signal intensity was investigated for better performance of LIBS technique as a quantitative analytical tool. For comparative study of different binders, the signal intensity of different Mg lines at 518.3, 517.2, 383.8 and 279.5 nm wavelengths were recorded for pellets prepared with known concentrations of Mg in these binders. The influence of laser energy on ablated mass under different binding materials and its correlation with LIBS signal intensity has been explored. Optical scanning microscopy images of the ablated crater were studied to understand the laser ablation process. The study revealed that the binding material plays an important role in the generation of LIBS signal. The relative signal intensity measured for a standard Mg line (at 518.3 nm) were 735, 538, 387, 227 and 130 for potassium bromide, starch, poly(vinyl alcohol), silver and aluminum as binders, respectively. This indicates clearly that potassium bromide is better as a binder for LIBS studies of powder samples.     

Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.